Technical Specs:

RX # of Channels

256 per block (10 blocks)

RX Type

UCR100 UHF Frequency agile Receiver

RX RF Carrier Frequency Range

537.6 - 608MHz,
614 - 793.5MHz (in 10 blocks)

RX Appox. Working Range

300' in adverse conditions,
1000' in ideal conditions

RX Overall Frequency Response

50Hz - 18kHz (+/- 2dB)

RX Signal-to-Noise Ratio

105dB (overall system)

RX Outputs

1/8" Mini connector

RX Headphone Monitoring

No

RX Power Requirements

60mA

RX Battery Type/Approx. Life

8 Hours with 9V alkaline battery,
15 Hours with 9V lithium battery

RX Display

2-Position "On/Off" switch,
Audio Gain adjust dial,
Recessed low frequency roll-off control,
2-Rotary frequency adjust controls

RX Antenna Type

Fixed, flexible cable.

RX Dimensions (WxHxD)

3.6 x 2.4 x 0.8" (91.44 x 60.96 x 2.032mm)

RX Weight

7.3 oz (207g) (with battery)

TX # of Channels

256 in 100kHz steps

TX Inputs

Switchcraft 5 pin locking (TA5F)

TX Frequency Response

90 Hz to 20 Hz (+/-1 dB)

TX Battery Type/Approx. Life

[9 Volt]: Alkaline 6 hours, LiPolymer 7 hours, Lithium 13 hours

TX Mute Switch

On/Off Switch

TX Level Control

Audio level gain control dial,
43 dB semi-log rotary control

TX Antenna Type

Galvanized steel, flexible wire

TX Display

-10dB / -20dB LED

TX Power LED

Yes

TX Dimensions (WxHxD)

3.1 x 2.4 x .75" (78.74 x 60.96 x 19.05mm)

TX Weight

6.3 oz (180g) (including battery)

MIC Transducer

Electret Condenser

MIC Polar Pattern

Omnidirectional

MIC Frequency Response

40Hz - 16kHz

MIC Maximum Input Sound Level

134dB

MIC Dynamic Range (Typical)

108dB

MIC Signal-to-Noise Ratio

110dB

MIC Power Requirements

12 to 48V phantom power

MIC Output Impedance

3.5k Ohms

MIC Output Connectors

3-pin XLR

MIC Low Frequency

No low frequency roll-off

MIC Dimensions (WxHxD)

0.3 x 0.54 x 0.196" (7.62 x 13.716 x 4.978mm)

MIC Weight

0.27 oz (7.7g)